<listing id="vx7t7"><strike id="vx7t7"><strike id="vx7t7"></strike></strike></listing>

    <big id="vx7t7"></big>
    <pre id="vx7t7"><ruby id="vx7t7"></ruby></pre>
    <noframes id="vx7t7"><pre id="vx7t7"><ruby id="vx7t7"></ruby></pre>
    
    
      <pre id="vx7t7"></pre>

          <pre id="vx7t7"></pre>
          <address id="vx7t7"></address>
          <track id="vx7t7"><ruby id="vx7t7"><rp id="vx7t7"></rp></ruby></track>
            <noframes id="vx7t7"><ruby id="vx7t7"><ruby id="vx7t7"></ruby></ruby><pre id="vx7t7"></pre>
            <track id="vx7t7"></track>
            全國服務熱線:023-68935115
            TEL:13101397500
            公告:
              重慶丹智磨床(原品銳磨床)有限責任公司是一家機電一體化的高科技企業,專業從事砂帶磨削與拋光設備的設計、開發、制造與銷售!
            2M53型平面砂帶機磨床(含焊縫打磨機) 當前位置:首頁 > 產品展示 > 2M53型平面砂帶機磨床(含焊縫打磨機)
            2M53250型多功能大型平板打磨拋光機添加時間:2022-04-06
            2M53250型多功能大型平板打磨拋光機

            結構與用途 

            該機床由磨頭組、橫梁、磨頭橫向進給機構、磨頭縱向進給機構、滾輪組、軌道、床身、氣動系統、電氣控制系統等組成。磨頭組為兩套恒壓力浮動磨頭,可以裝上砂輪、千頁輪、砂帶及鋼絲輪等對工件進行打磨和拋光。加工時縱向進給機構驅動橫梁帶著磨頭沿工件長度方向前進,到達行程終點,磨頭自動抬刀,并作橫向進給,然后磨頭反向行駛進行磨削。到達行程終點,磨頭又自動抬刀、橫向進給,再反向行駛;如此循環往復,直至將工件待磨表面磨削完畢。由于采用磨頭移動、工件不動的磨削方式,所以,工件長度幾乎不受限制,只需將床身和導軌相應改變即可。                                                                                                                   

            主要用于拋磨各種材質的大型平面,特別適用于復合板生產廠家打磨碳鋼基材和拋光復合后的板材表面。

            主要技術參數

            可加工平面的最大尺寸(長X寬):10mX2.5m-4m  

            砂帶規格(周長X寬):3500mmX150mm

            磨輪驅動電機功率:15-30KW

            加工面的表面粗糙度:Ra≥1.6μm

            電源:380V,50Hz

            運行噪聲:85db

            QQ圖片20200101211902.jpg

            漂亮人妻被别人侵犯,兔女郎穿着丝袜被啪啪,撅高屁股乖乖被男人收拾NP
            <listing id="vx7t7"><strike id="vx7t7"><strike id="vx7t7"></strike></strike></listing>

              <big id="vx7t7"></big>
              <pre id="vx7t7"><ruby id="vx7t7"></ruby></pre>
              <noframes id="vx7t7"><pre id="vx7t7"><ruby id="vx7t7"></ruby></pre>
              
              
                <pre id="vx7t7"></pre>

                    <pre id="vx7t7"></pre>
                    <address id="vx7t7"></address>
                    <track id="vx7t7"><ruby id="vx7t7"><rp id="vx7t7"></rp></ruby></track>
                      <noframes id="vx7t7"><ruby id="vx7t7"><ruby id="vx7t7"></ruby></ruby><pre id="vx7t7"></pre>
                      <track id="vx7t7"></track>